Shadazzle Natural Wood Restorer

Home care · 500 ml (16.9 fl oz) tin

Shadazzle Natural Wood Restorer

$18.99
  • Liquid
  • Made in France
  • Solvent-free

Opens this product at our retail partner, where the price is confirmed and you check out.

In the box

  • One 500 ml (16.9 fl oz) tin of Natural Wood Restorer

Specs

ShelfHome care
FormLiquid
Size500 ml (16.9 fl oz)
Made inFrance
Use onFinished and sealed wood: furniture, cabinets, fitted kitchens, wood floors
SolventsNone

About this product

A cloth, a few drops, and wood that looks cared for

The wood restorer is a liquid in a 500 ml tin, and you put it on with a cloth or a cotton pad, never straight onto the wood. Rub it over a table top, a chair, a cabinet door or a wood floor, then wipe with a dry cloth. For dust, a few drops on the cloth do it. For a water mark or a white spot, wipe the surface again after two to three hours.

It is meant for finished and sealed wood, hard or soft, and for surfaces that pick up grease, fingerprints, old wax and nicotine stains, like kitchen fronts. The formula has no solvents, and the tin can be recycled. This is the product for wood in the Shadazzle range: the paste stays off it.

If the Natural Wood Restorer is close but not quite it, the home care shelf has 3 more products from the Shadazzle family of cleaners.

  • On a cloth

    Apply it to a cloth or a cotton pad, rub, then wipe with a dry cloth.

  • Water marks

    For a water stain or a white spot, come back after two to three hours and wipe again.

  • No solvents

    The formula is solvent-free, and the tin goes in the recycling when it is empty.

How to use it

  1. 1Put it on a clothPour a little onto a soft cloth or a cotton pad.
  2. 2Rub the woodRub it over the surface, working along the wood.
  3. 3Wipe dryWipe with a dry cloth.
  4. 4Water marksFor a water stain, wipe again after two to three hours.

Before you start

Try the restorer first on a spot that does not show, the back of a leg or the inside of a door, and see how your finish takes it. Clean only finishes that are sound: a finish that is cracked, flaking or lifting, painted furniture and old veneer belong with a furniture restorer. A white ring is usually the finish itself turning cloudy, not the wood. Keep the tin closed and away from children.

Questions

About the Shadazzle Natural Wood Restorer

How do you apply Shadazzle wood restorer?

On a cloth or a cotton pad: rub the surface, then wipe with a dry cloth. For dust, a few drops on the cloth are enough.

Which wood can you use Shadazzle wood restorer on?

Finished and sealed wood, hard or soft: furniture, cabinets, fitted kitchens and wood floors.

What do you do with your empty Shadazzle tin?

The container can be recycled.

More home care and neighbors from Shadazzle

All products